Cursive B – Capital and Small B in Cursive
Cursive B is written as a tall stem with two bumps on the right, the lower one larger, much like a print B with softer curves for the capital, and a tall loop with a little closed bowl at the bottom that ends in a small sideways tick at the midline for the small b. To write capital B, start near the midline with a short entry stroke up to the top line; small b is a loop letter. To type it, copy ℬ 𝒷 (script) or 𝓑 𝓫 (bold script) below.
Cursive B copy and paste
These are real Unicode characters, so they paste as text into a bio, a caption, a document or a chat. Pick the style you want and tap Copy.
Want a whole sentence instead of one letter? Type it into the cursive text generator, which converts every letter at once.
How to write a capital B in cursive
- Start near the midline with a short entry stroke up to the top line.
- Slant straight down to the baseline, then retrace a little way back up the stem.
- Curve forward to make the upper bump and bring it back to the stem at the midline with a tiny loop.
- Curve forward again to make a larger lower bump that sits on the baseline.
- Finish with a short curve back toward the stem. Most school models do not join capital B to the next letter.
The capital B is a tall stem with two bumps on the right, the lower one larger, much like a print B with softer curves. It fills the space from the baseline to the top line. In Zaner-Bloser style capital B is not joined to the letter after it; you lift the pen and start the next letter fresh.
How to write a small b in cursive
- Start on the baseline and undercurve up to the top line.
- Loop to the left and slant straight down to the baseline.
- Curve up and around to the midline to close a small rounded body.
- Finish with a short checkstroke to the right at the midline.
Small b belongs to the loop family (e, l, h, k, f and b), the group of lowercase letters that begin with an undercurve that rises into a loop. Handwriting programs teach letters in these families rather than in A to Z order, because one movement carries across the whole group.
How cursive b joins other letters
Small b is one of the four high-exit letters (b, o, v and w). It finishes with a short checkstroke at the midline, so the next letter is joined from the midline with an almost flat stroke rather than from the baseline. That is why pairs like br and bo look different from the same letters after an a or an e.
Coming into a b, the undercurve from the previous letter simply continues up into the b, which makes it one of the smoothest letters to join.
Capital B: In Zaner-Bloser style capital B is not joined to the letter after it; you lift the pen and start the next letter fresh. Which capitals join varies between models: Zaner-Bloser and D’Nealian agree on most letters but differ on a few, such as capital I, L and Q. If your school uses a workbook, follow the workbook.
Capital B vs small b at a glance
| Capital B | Small b | |
|---|---|---|
| Height | baseline to top line | baseline to top line |
| Where it starts | Start near the midline with a short entry stroke up to the top line | Start on the baseline |
| Pen lifts | No, one continuous stroke | No |
| Joins the next letter | No (Zaner-Bloser style) | Yes, from the midline (high exit) |
Common mistakes with cursive B
- Dropping the checkstroke, which makes small b look like an l followed by a curve.
- Joining the next letter from the baseline instead of from the midline.
- Leaving the lower bump of capital B open so it reads as a 3.
Letters that get confused with cursive b
Small b without its checkstroke looks like a small l, and a joined b + r can read as 'lr' if the checkstroke is too flat.
Why does cursive B look like that?
Small b ends high because its last stroke is a checkstroke at the midline. That is why the letter after b starts at the midline instead of the baseline.
Words with b in cursive
Seeing b inside real words shows how it behaves at the start, in the middle and at the end of a word.
Names starting with B in Unicode script, ready to copy:
A five-minute practice plan for cursive b
- Warm up (1 minute). Draw a row of the basic stroke this letter starts with: a loop, repeated across the line without lifting.
- Small b (1 minute). Write a row of small b, slowly, saying the steps aloud. Check the height against the midline.
- Joins (1 minute). Write the pairs br bo be bl. Practise 'be', 'bo' and 'br' as pairs. The join from b is a short, almost flat stroke at the midline.
- Capital B (1 minute). Write five capitals, then the names Bella, Benjamin.
- Words (1 minute). Copy baby, rabbit, bubble, number. Finish dots and crosses at the end of each word.
Short daily sessions work better than one long one. Keep the paper tilted so your downstrokes follow the slant, and write on lined paper with a dashed midline if you can. The printable cursive alphabet chart shows B next to every other letter, and the cursive writing worksheets include tracing rows.
Cursive B as text: where it works
The copyable ℬ and 𝒷 are not a handwriting font. They are separate Unicode characters, script capital B (U+212C) and script small b (U+1D4B7), originally encoded for mathematics. ℬ (U+212C) lives in the older Letterlike Symbols block rather than the Mathematical Alphanumeric Symbols block, because it was encoded years earlier. It still works when pasted, but some fonts draw it in a slightly different style from its neighbours. Because they are characters, they keep their look when pasted into Instagram, TikTok, X, Discord, WhatsApp and most documents.
- They do not join. Each character is separate, so text made from them never connects like real cursive handwriting.
- Search and screen readers struggle. A screen reader may read 𝒷 as “mathematical script small b”, and search boxes may not match it to a normal b. Keep names people need to find you by in plain text.
- Some fields reject them. Usernames, email addresses and many game name fields only accept plain letters.
More cursive letters
Letter drawings use Playwrite US Trad, an open-source (SIL Open Font License) model of traditional US school cursive. Zaner-Bloser, D’Nealian and other programs differ in small details, so if a teacher gives you a model, follow it.
Frequently asked questions
How do you write a capital B in cursive?
Start near the midline with a short entry stroke up to the top line. Slant straight down to the baseline, then retrace a little way back up the stem. Curve forward to make the upper bump and bring it back to the stem at the midline with a tiny loop. Curve forward again to make a larger lower bump that sits on the baseline. Finish with a short curve back toward the stem. Most school models do not join capital B to the next letter.
How do you write a lowercase b in cursive?
Start on the baseline and undercurve up to the top line. Loop to the left and slant straight down to the baseline. Curve up and around to the midline to close a small rounded body. Finish with a short checkstroke to the right at the midline.
Does cursive capital B connect to the next letter?
In Zaner-Bloser style capital B is not joined to the letter after it; you lift the pen and start the next letter fresh. Models differ on a few capitals, so follow your school workbook if you have one.
What does a cursive b look like?
Capital B is a tall stem with two bumps on the right, the lower one larger, much like a print B with softer curves. Small b is a tall loop with a little closed bowl at the bottom that ends in a small sideways tick at the midline.
How do I copy and paste a cursive B?
Copy ℬ (U+212C) for a script capital B or 𝒷 (U+1D4B7) for a script small b. Bold script versions are 𝓑 and 𝓫. Use the Copy buttons on this page.
Why does cursive B look different from print?
Small b ends high because its last stroke is a checkstroke at the midline. That is why the letter after b starts at the midline instead of the baseline.
Why does the letter after a cursive b start at the midline?
Small b ends with a checkstroke at the midline instead of an undercurve on the baseline, so the join to the next letter runs along the midline.