Do Cursive Letters Have to Connect? (And Which Do Not)
No, not every cursive letter has to connect. Almost all small letters join the next letter, but several capitals do not: in Zaner-Bloser style B, F, G, I, L, Q, S and T are written without a join, and capitals that end at the top, such as O, V and W, are usually left unjoined too, and dots, t-crosses and the second stroke of x are added after the word. Many adults also write a partly joined hand, which is normal and often faster.
Which small cursive letters connect?
All 26 small letters can join in cursive. What differs is where the join leaves and arrives:
| Letter | How it is joined into | How it joins out | Added after the word |
|---|---|---|---|
| a | Up to the midline, then back left into an oval | From the baseline | |
| b | From the baseline, rising into a loop | At the midline (checkstroke) | |
| c | Up to the midline, then back left into an oval | From the baseline | |
| d | Up to the midline, then back left into an oval | From the baseline | |
| e | From the baseline, rising into a loop | From the baseline | |
| f | From the baseline, rising into a loop | From the descender loop, closing at the baseline | |
| g | Up to the midline, then back left into an oval | From the descender loop, crossing at the baseline | |
| h | From the baseline, rising into a loop | From the baseline | |
| i | From the baseline, rising | From the baseline | Dot after the word |
| j | From the baseline, rising | From the descender loop, crossing at the baseline | Dot after the word |
| k | From the baseline, rising into a loop | From the baseline | |
| l | From the baseline, rising into a loop | From the baseline | |
| m | Over a small hump | From the baseline | |
| n | Over a small hump | From the baseline | |
| o | Up to the midline, then back left into an oval | At the midline (checkstroke) | |
| p | From the baseline, rising | From the baseline | |
| q | Up to the midline, then back left into an oval | From the descender loop, closing at the baseline | |
| r | From the baseline, rising | From the baseline | |
| s | From the baseline, rising | From the baseline | |
| t | From the baseline, rising | From the baseline | Cross after the word |
| u | From the baseline, rising | From the baseline | |
| v | Over a small hump | At the midline (checkstroke) | |
| w | From the baseline, rising | At the midline (checkstroke) | |
| x | Over a small hump | From the baseline | Cross after the word |
| y | Over a small hump | From the descender loop, crossing at the baseline | |
| z | Over a small hump | From the descender loop, crossing at the baseline |
The four high-exit letters, b, o, v and w, are the ones that most often confuse learners: because they end at the midline, the next letter starts from there with an almost flat join. Compare bo and ao:
Which cursive capital letters connect?
Capitals are where models disagree. This table follows Zaner-Bloser, the most widely used US school model, with D’Nealian differences noted.
| Capital | Zaner-Bloser style | Notes |
|---|---|---|
| A | Usually joins | |
| B | Usually not joined | Ends with a short sideways stroke |
| C | Usually joins | |
| D | Usually not joined | Ends at the top |
| E | Usually joins | |
| F | Usually not joined | Two strokes; ends with a crossbar |
| G | Usually not joined | Ends with a short stroke |
| H | Usually joins | |
| I | Usually not joined | D’Nealian writes I so that it joins |
| J | Usually joins | |
| K | Usually joins | |
| L | Usually not joined | Zaner-Bloser L runs under the next letter |
| M | Usually joins | |
| N | Usually joins | |
| O | Usually not joined | Ends at the top |
| P | Usually not joined | The bowl closes on the stem |
| Q | Usually not joined | D’Nealian Q joins; Zaner-Bloser Q ends under the baseline |
| R | Usually joins | |
| S | Usually not joined | Ends curled back toward itself |
| T | Usually not joined | Two strokes; the cap is added separately |
| U | Usually joins | |
| V | Usually not joined | Ends at the top |
| W | Usually not joined | Ends at the top |
| X | Usually not joined | Two strokes |
| Y | Usually joins | |
| Z | Usually joins |
Why do some capitals not join? Mostly because of where they end. A capital that finishes at the top (D, O, V, W), curls back on itself (S, G, B) or is written in two strokes (F, T, X) has no natural exit stroke on the baseline. Older ornamental styles often extended a long stroke to reach the next letter, and modern school models kept only a stub of it.
Is it wrong to lift your pen in cursive?
No. Even strict school models lift the pen for dots, crosses, non-joining capitals and between words. Many experienced writers also lift briefly in the middle of long words, which is fine as long as the letters keep their cursive shapes and spacing. Research on handwriting speed found that students who used a mixed style, joining some letters and not others, wrote faster than students who used only print or only cursive (Graham, Weintraub and Berninger, 1998). See is cursive faster than print.
Joining rules in brief
- Write the whole word without lifting, except for capitals that do not join.
- Leave dots on i and j, crosses on t, and the second stroke of x until the word is finished.
- After b, o, v and w, join from the midline, not the baseline.
- Before a, c, d, g, o and q, carry the join up to the midline and swing back left to start the oval.
- Before n, m, v, x, y and z, let the join roll over into the letter’s hump.
- Keep the space between words wider than the space between letters.
Do cursive letters connect in other languages?
The rules on this page are for English handwriting in US school styles. In Arabic script, joining is part of the alphabet itself, and six letters never connect to the letter after them. Russian handwritten cursive joins almost every letter. Our page on which languages have cursive covers these.
Learn each join letter by letter on cursive letters A to Z, or start from the basics with what cursive letters are and how to write in cursive.
The nine cursive joins
Zaner-Bloser names its joinings after the stroke that ends the first letter and the stroke that begins the next one, and teaches nine of them in three groups. Every small letter ends in one of three ways (an undercurve on the baseline, an overcurve after a loop below the line, or a checkstroke at the midline) and begins in one of three ways (undercurve, downcurve or overcurve). Three endings times three beginnings gives nine joins:
| First letter ends with | Next letter starts with | Example |
|---|---|---|
| Undercurve (most letters) | Undercurve | it, el, us |
| Undercurve | Downcurve | ia, ld, eg |
| Undercurve | Overcurve | in, um, ex |
| Overcurve (g, j, y, z) | Undercurve | ye, ji, gi |
| Overcurve | Downcurve | ya, go, ja |
| Overcurve | Overcurve | yn, gm, zy |
| Checkstroke (b, o, v, w) | Undercurve | oi, we, bl |
| Checkstroke | Downcurve | oa, wo, bo |
| Checkstroke | Overcurve | on, vm, wn |
The checkstroke joins are the ones most people get wrong: after b, o, v and w, the join runs along the midline instead of dropping to the baseline. Practise “on”, “bo”, “we” and “vow” until that feels natural.
How to practise joins
- Write each pair from the table five times without lifting the pen.
- Say the stroke names aloud as you write: “undercurve, overcurve” for in.
- Write a short word that contains the join, such as “it”, “go” and “on”.
- Use the worksheet maker to print rows of joins such as “bo ov wh br”.
- Check that the join stroke is smooth and does not form an extra loop.
Remember that the join is part of the next letter’s start: a good join lands exactly where that letter begins, at the baseline for undercurve letters and at the midline for overcurve and downcurve letters.
Once the nine joins feel natural, try writing whole sentences without stopping inside words; lift the pen only between words, for capitals that do not join, and for dots and crosses.
Sources
Frequently asked questions
Do cursive letters have to connect?
Small letters in a word normally connect, but not every letter must. Several capitals are not joined, dots and crosses come after the word, and many fluent writers lift the pen occasionally. Readability matters more than unbroken joins.
What cursive letters do not connect?
In Zaner-Bloser style the capitals B, F, G, I, L, Q, S and T are not joined to the next letter, and capitals that end at the top, such as O, V and W, are usually left unjoined. Exact rules differ between models. All small letters can join.
Do cursive capital letters connect?
Some do. Capitals that end on the baseline with a forward stroke, such as A, C, H, K, M, N, R and U, usually join the next letter. D'Nealian also joins I and Q, which Zaner-Bloser leaves unjoined.
Why do b, o, v and w connect differently?
They end with a checkstroke at the midline instead of an undercurve on the baseline, so the next letter is joined from the midline.
Is it OK to lift the pen when writing cursive?
Yes. Pen lifts are needed for dots, crosses, some capitals and between words, and mixing joined and unjoined letters is common and often faster.
How many cursive joins are there?
Zaner-Bloser teaches nine joinings, named after the ending stroke of the first letter (undercurve, overcurve or checkstroke) and the starting stroke of the next (undercurve, downcurve or overcurve).
Which cursive letters join at the midline?
b, o, v and w end with a checkstroke at the midline, so the letter that follows is joined from up there rather than from the baseline.
Are the cursive joining rules different for left-handed writers?
The joins are the same. What changes is the setup: left-handed writers usually tilt the paper clockwise (to the right) and hold the pencil a little further from the tip, so they can see what they have written and avoid smudging. A pen lift inside long words is fine if it keeps the hand comfortable.
How do I make cursive letters connect in Canva or Cricut?
Choose a connected script font, since not every script font joins. In Canva, reduce the letter spacing until the strokes touch. In Cricut Design Space, tighten the letter spacing so the letters overlap, then select the text and use Weld so it cuts as one piece instead of separate letters.
Do all cursive fonts connect letters the same way?
No. Some script fonts have joining strokes built into every letter, some use alternate letter shapes for better joins, and some only look joined at certain sizes and spacings. Copy-and-paste cursive text made from Unicode symbols never truly joins, because each character is separate.